Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G
Ethernet Media Converter Function
Industrial Ethernet Switch Advantages
► Transparent Transport and very low delay
► 3R function (Regeneration, Reshaping, Re-timing)
► Support hot plugging, full state led display, easy installation
► Support ITUT prescribed DWDM/CWDM wavelength, and can also
display it’s DDM function
► Support Loop-back and Jumbo Frame
► DIP Switch supports 1.25G/10G fiber data rate switching
► Can be as 1G Ethernet Media Converter if using Ethernet
► IP40 Aluminum Case
Industrial Ethernet Switch Technical Indexes
| Performance Data | Technical Indexes |
| Equipment function | 3R Repeater |
| Transmission Speed | 10G: 8.5Gb/s-11.7Gb/s |
| Protocols | 8.5G Fiber Channel SONET OC-192, SDH STM-64 (9.95Gbps) 10G WAN (10Gbps) 10G LAN (10.31Gbps) OTN OTU-2 (G.709) (10.70Gbps) 10G LAN with 255/237 FEC coding (11.09Gbps) 10G Fiber Channel (11.32Gbps) 10G POS |
Maximum Packet Forwarding Rate | 14,880,950/S |
| Ethernet Media Converter Specifications |
| Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3x Full-duplex flow control |
| Work Mode | 10/100/1000BASE-T to 1000BASE-SX/LX |
| Port Type | SFP to RJ45 |
| Network Cables | Twisted-pair
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m
100BASE-TX: 2-pair UTP Cat. 5, up to 100m
1000BASE-T: 4-pair STP Cat 5 up to 100m Fiber-optic Cable
1000BASE-SX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m/2km.
1000BASE-LX:
9/125μm single-mode cable, providing long distance for
10/20/40/80/120km (vary on SFP module) |
| Electrical and Mechanical |
| Power Input Overload | Automatic Resettable |
| Reverse Polarity | Present |
| LED Indicators: |
| PWR | Power Status |
| FX1 | SFP Port-1 |
| FX2 | SFP Port-2 |
| L/A | TP LINK/ACT |
| Casing | Aluminum Case |
| Mounting Options: | DIN-Rail mount |
Industrial Ethernet Switch Overview
ETH-IMC2402-OEO series Industrial 10G OEO Converter is a connection
between fiber to fiber 10Gbps equipment function as fiber media
converter, or as fiber repeater for long distance transmission in
harsh environment at operating temperature -40~ 80℃.
It is for network backbone (SAN, LAN, MAN) application. Support
SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet, which can
be applied in R&D laboratory, data center, telecommunication
room. It supports optical wavelength conversion
1310nm/1550nm/CWDM/DWDM with Loop-back.
When only the copper and fiber port are connected, it enables the
1Gbps Ethernet equipment to function as a fiber-to-copper media
converter, allowing for long-distance transmission up to 120km
between fiber and copper connections.
Ordering Information
| Model | Description |
| ETH-IMC2402-OEO | Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G
Ethernet Media Converter Function |
| SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
| ► SFP module is to be purchased separately. |
| Mounting Options | ► Default DIN-Rail Bracket installed |
| Power Options | ► DIN-Rail Power Supply. Open Wire for Terminal Block. |
| ► Power Supply is to be purchased separately. |
